| Author |
Message |
|
K-J
|
Post subject: Warnings during voxeling  Posted: Thu Dec 03, 2009 7:24 pm |
|
 |
| New Member |
Joined: Wed Dec 02, 2009 12:06 pm
Posts: 7
|
|
Hello everyone,
I'm having a warning when voxeling my model that tells me that "no voxels were assigned to ........" ; I'm trying all I know to resolve this warning but even refining a lot the grids and increasing the number of cells, the warning is still there.
If anyone has an idea, I'll let you tell me. Thanks in advance!
K-J
|
|
  |
|
 |
|
Spuky
|
Post subject: Re: Warnings during voxeling Posted: Thu Dec 03, 2009 11:10 pm |
|
|
| Regular Member |
Joined: Thu Jan 08, 2009 3:03 pm
Posts: 46
|
|
Hi,
As a first I would suggest to delete all other parts in the simulation and try to voxel that single part which give you an error message. If this will be OK there could be two parts overlapping each other and just the "lager" is voxeled. You can solve this by subtracting of these two parts or maybe a little bit better solution to assign higher priority for the model which is not voxeled.
Hope this helps.
Spuky
|
|
| |
|
|
|
K-J
|
Post subject: Re: Warnings during voxeling Posted: Fri Dec 04, 2009 9:51 am |
|
|
| New Member |
Joined: Wed Dec 02, 2009 12:06 pm
Posts: 7
|
|
It worked !
Thank you very much
|
|
| |
|
|
|
